![]() ![]() ![]() ![]() ![]() ![]() |
|||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|||
![]() |
|
Navigation: Previous Page | Contents | Next Page Chapter 8 Audit Report No. 27 2009-10 Coordination and Reporting of Australia’s Climate Change MeasuresIntroduction[1]8.1 Climate change caused by the emission of greenhouse gases has been recognised as a global challenge. Although the impacts of climate change may vary worldwide, these can include increases in average surface temperatures, sea level rise, increased climate variability and extreme weather events, such as prolonged drought and severe storms.[2] There is evidence in Australia that climate change has already had an impact. The Australian Bureau of Meteorology has indicated that since the 1950s temperatures in Australia have, on average, risen by about one degree Celsius with an increase in the frequency of heatwaves and a decrease in the numbers of frosts and cold days.[3] Rainfall patterns have also changed with the northwest of Australia experiencing an increase in rainfall over the last 50 years, while at the time of the audit much of eastern Australia and the far southwest have experienced a decline in rainfall and prolonged drought conditions. 8.2 The United Nations Framework Convention on Climate Change (UNFCCC) was established in 1992. It sets out an overall framework for intergovernmental efforts to address the challenges posed by climate change. Australia is among some 194 national signatories to the convention, which is the primary forum for designing global climate change strategies. In recognition of the risks presented by rising greenhouse gas (GHG) emissions, the Kyoto Protocol was established under the convention in 1997. The protocol aims to foster national emission reductions through a binding international agreement. Forty countries, including Australia, have emission targets under the Kyoto protocol designed to be achieved over the five year Kyoto period, 2008-12. 8.3 The Government has indicated that addressing climate change is a high priority and more than $15 billion has been committed to climate change initiatives.[4] The Government’s response to climate change is based on its Three Pillars strategy: reducing emissions; adapting to unavoidable climate change; and helping to shape a global solution. 8.4 The Department of Climate Change (DCC) was established in December 2007 to assist the government to pursue its climate change agenda. DCC had specific responsibility for:
8.5 In March 2010, DCC became the Department of Climate Change and Energy Efficiency (DCCEE). The energy efficiency function of the Department of the Environment, Water, Heritage and the Arts was also transferred to the new department. 8.6 DCCEE also administers the recently legislated 20 per cent renewable energy target and has to implement the Carbon Pollution Reduction Scheme (CPRS) currently being proposed by the Government subject to the passage of the legislation by the Parliament.[5] 8.7 State and Territory Governments have also introduced an extensive range of measures to reduce GHG emissions and to adapt to climate change. The Australian Government has been working with State and Territory Governments through the Council of Australian Governments (COAG) to achieve a coordinated intergovernmental response to climate change. In December 2007, COAG ‘acknowledged the benefits in reducing the confusion, overlap, duplication, and red-tape associated with the current proliferation of climate change programs across jurisdictions.’[6] In March 2008, COAG agreed that each jurisdiction would review their climate change mitigation measures[7] in order to harmonise and align existing and future programs with the proposed emissions trading scheme. 8.8 To measure Australia’s GHG contribution, the Australian Government has maintained a national emissions inventory since the early 1990s. The inventory, which is managed by DCCEE, provides a detailed national profile of Australia’s emissions. The inventory is classified into six internationally defined sectors, based on particular emissions processes:
8.9 Australia’s largest emitting sector is stationary energy and, in 2007, it contributed to over half of the national GHG emissions.[9] 8.10 Data from the inventory is used to meet international reporting requirements under the UNFCCC and the Kyoto Protocol, and to track progress towards the Kyoto emissions target. Activity data, used to estimate GHG emissions, is principally sourced from other Australian Government agencies, such as the Australian Bureau of Statistics. The introduction of the National Greenhouse and Energy Reporting Act 2007 (NGER Act) has also meant new reporting arrangements, as the Act mandates annual emissions reporting for corporations whose energy production, energy use, or GHG emissions exceed defined thresholds. Data collected under the NGER Act will supplement existing data collection arrangements. 8.11 Measures to mitigate the production of GHG emissions have been undertaken by all jurisdictions, primarily through a mixture of regulatory measures, grant programs, incentive and rebate schemes. To assess the impact of Australia’s climate change programs, reliable and accurate calculations of the amount of GHG emissions abated is necessary. Abatement estimates are calculated by DCCEE to determine the aggregate and likely future impact of Government measures. The Department’s estimates are used to track Australia’s progress towards meeting emissions targets, including the Kyoto Protocol target. Abatement estimates for individual programs are also calculated by the agency responsible for delivering the program. The impact of Australia’s abatement initiatives are reported by DCCEE in public reports and in the four yearly National Communications report to the UNFCCC. The AuditAudit objectives[10]8.12 The objective of this audit was to assess the coordination of Australian, State and Territory Government climate change programs and the integrity of measuring and reporting of Australia’s greenhouse gas emissions and abatement. Particular emphasis was given to the:
Overall audit conclusion[11]8.13 The ANAO made the following overall audit conclusion: Australian, State and Territory Governments are taking action in response to climate change. Measures have been put in place across all jurisdictions to reduce Australia’s GHG emissions and, under COAG, programs are being streamlined. Since 1992, Australia has also been involved in international efforts to address climate change through the UNFCCC. Australia’s national inventory has been improved over time and provides a sound basis for understanding the sources, trends and levels of emissions from industry sectors. The inventory is also used to measure and report on Australia’s progress in meeting the Kyoto Protocol emission target of 108 per cent of 1990 levels (under the UNFCCC). ANAO recommendationTable 8.1 ANAO recommendation, Audit Report No. 27 2009-10
The Committee’s review8.14 The Committee held a public hearing on Wednesday 16 June 2010, with the following witnesses:
8.15 The Committee took evidence on the following issues:
Reviews8.16 The ANAO noted that the Council of Australian Governments (COAG) had established a Complementary Measures Sub-Group of Australian State and Territory governments to undertake a review of climate change mitigation measures being undertaken by State and Territory governments to streamline these measures across jurisdictions.[14] The reviews were due for completion by mid-2010. The Committee asked DCCEE if the reviews had been finalised. 8.17 DCCEE informed the Committee that the reviews had been completed and the final report is now available on the COAG website.[15] National Framework for Australian Climate Change Science8.18 The ANAO noted the importance of the National Framework for Australian Climate Change Science in avoiding costly overlaps and duplication in climate change research.[16] An implementation plan for the Framework was expected to be completed by June 2010.[17] The Committee asked DCCEE for an update on the progress of the implementation plan. 8.19 DCCEE told the Committee that the Implementation Program for the Framework is being developed by the High Level Coordination Group, chaired by the Chief Scientist, and is expected to be completed by November 2010. The additional time has been necessary to ensure that: ... the Implementation Plan fully integrates the national climate change science effort, enabling resources to be deployed with maximum efficiency.[18] UNFCCC recommendations8.20 The ANAO noted that Australia’s Greenhouse Gas Emissions Inventory is subject to an annual review by the United Nations Framework Convention on Climate Change (UNFCCC).[19] The Audit found that although 74 per cent of the UNFCCC recommendations for the latest review had been implemented there were 13 recommendations outstanding and that it was unclear ‘how the department plans to handle these matters’.[20] The Committee asked DCCEE what steps the Department has taken to address these outstanding recommendations. 8.21 DCCEE explained that the UNFCCC reviews only become available late in the annual inventory cycle and recommendations cannot always be acted on in time to include in the imminent Inventory Report.[21] For example, in 2010 the UNFCCC review report was released on 5 March and the National Inventory Report was due on 27 May.[22] 8.22 DCCEE informed the Committee that after the release of the Audit Report, the Department has taken steps to ensure that progress on the implementation of recommendations is included in the National Inventory Report.[23] The Department told the Committee that the May 2010 National Inventory Report includes a list of the UNFCCC recommendations, a timeframe for implementation and actions taken to address each recommendation.[24] 8.23 In addition, DCCEE told the Committee that UNFCCC recommendations that will take time to implement have ‘been included within the Department’s work program for 2010-11’ and progress on implementation will be included in the next National Inventory Report in April 2011.[25] Quality data collection8.24 The ANAO noted that the implementation of the National Greenhouse Energy Reporting Act 2007 (NGER Act) would improve the quality of data collected for Australia’s emissions inventory.[26] The Committee noted that the first data collected under this legislation had been due in late October 2009 for the 2008-09 financial year and asked DCCEE how the integration of this data into the inventory went. 8.25 DCCEE informed the Committee that the first data collected under the NGER Act is currently being integrated into Australia’s National Inventory and will be included in Australia’s next submission to UNFCCC in April 2011.[27] 8.26 The Committee inquired if the integration of the data had presented any difficulties for the Department. DCCEE told the Committee that the integration has required the ‘development and refinement of the software used to manage the national inventory’ and that this process has been managed over two inventory cycles and should be completed during 2011.[28] 8.27 The Committee asked DCCEE if the quality of the data collected had improved. The Department told the Committee that as a result of the data collected under the NGER Act the National Inventory will be more accurate.[29] DCCEE identified gaps in the data collection that will be filled and a number of areas where the collection process has been streamlined.[30] In its submission to the inquiry, the Department provided examples of the way the collected data will improve the overall outcome: The data collected will improve the quality of the emission estimates through a greater utilisation of facility-specific data, the increased use of higher-order tier 3 methods to estimate emissions and through improved allocation of data to individual sectors. The reporting of standardised measurements made by individual facilities, encouraged under NGERs, will improve the accuracy of the inventory. Small improvements in the coverage of emission sources will also be achieved.[31] Abatement measurement guidelines8.28 The ANAO noted the need for a consistent and standardised approach to measurement of program abatement to enable governments to make informed decisions about the effectiveness of abatement programs.[32] The DCCEE advised the ANAO that a draft guidance document outlining such measures was being developed at the time of the Audit and was expected to be published by mid-2010.[33] The Committee asked DCCEE if that tool had been completed and implemented. 8.29 DCCEE informed the Committee that the proposed guidelines are still under development and that a draft is ‘currently undergoing internal Departmental clearance processes’.[34] ‘Business as usual’ factors8.30 The ANAO noted that in some cases it was difficult to distinguish between improvements in abatement caused by business as usual and economic initiatives and those resulting from government programs.[35] The ANAO suggested that more consideration should be given to the business as usual component within programs and broader abatement drivers in order to improve the integrity of individual estimates.[36] The Committee asked DCCEE if any steps had been taken to improve the consideration of business as usual factors and other economic drivers. 8.31 DCCEE informed the Committee that a program to improve individual estimates is underway and business as usual factors and other economic drivers would be considered as part of that work program.[37] Reporting8.32 The ANAO found that the level of reporting on the impact of individual programs across Government agencies was inconsistent and generally poor.[38] Further, the Audit found that the reporting on individual programs was often ad hoc making it difficult to consolidate and compare the results.[39] The ANAO recommended that responsible agencies report annually on abatement estimates/figures and that DCCEE publish an annual consolidated report.[40] The Committee asked the Department what steps have been taken to implement this recommendation and improve reporting. 8.33 DCCEE told the Committee that the Department has commenced a work program to improve the estimates of individual measures and that the updated abatement estimates was to be published in a consolidated report in 2010 to ‘improve transparency and consistency’.[41] Conclusion8.34 The Committee is encouraged that Australia’s Greenhouse Gas Emissions Inventory meets international requirements and acknowledges the steps being taken by DCCEE to improve the implementation of UNFCCC recommendations with regard to the Inventory. 8.35 The Committee acknowledges that further consideration will need to be given to ongoing rationalisation of Australian, State and Territory Government climate change programs to prevent overlap and duplication. 8.36 The Committee is concerned by the inconsistencies identified in the reporting of abatement measures across agencies and urges that Government agencies and the DCCEE fully implement the ANAO recommendation to improve this process. The Committee notes that the initiatives outlined in response to this audit report were still in progress of implementation at the time of this inquiry and therefore recommends that the DCCEE provide the Committee with a progress report on implementation within 12 months of the tabling of this report.
|
![]() |